Page Comparison

The View Config tab holds the configurations that are applicable for the Analytical Charts App. Configure the View Configurations based on the description provided in the following table:

1. Caching:
   
   
   
   

   #	Field Name	Description	Sample Value
   Caching
   1	Enable Data Cache	Enable this option for scenarios where the underlying data source cannot support dynamic filter, sort, and group requests and can only return complete data set. This pulls the data from data source into an in-memory cache and performs all operations on the in-memory cache. Care must be taken when enabling this option to ensure that sizing based on usage needs are considered / factored before this is enabled. Toggle on: Cache data from data source prior to processing. Toggle off: Gets data from data source.	Toggle on
   2	Caching Scope	When Cache Data Indicator is 'Yes' enables the Caching Scope option. App Instance: Indicate that caching from data source must be done for every instance of the App. This means that there will be more requests to the data source for every time the user navigates to the App across workspaces. User Session: Indicates that the caching from data source is done at the Session level. This reduces the number of hits to the data source. This option must not be used for cases where within a session; the user does some activity and expects the cached data to change.	App Instance

   
   
   

2. Context Menu: 
   
   Context menus are the pop-up menus that appear when right-clicking the apps. Usually the context menus are created for the record manipulation activities.
   
   

   Info
   The context actions triggered using the context menu will enforce entitlement enabling a direct context to the logged-in user against the data they are viewing and the actions they can perform on the data.

   
   
   
   

   #	Field Name	Description	Sample Value
   Context Menu
   1	Enable Context Menu	Toggle on: Switch on the toggle to enable context menu for the grid.  Toggle off: Switch off the toggle if you do not want to enable context menu.	Toggle on
   2	Enable Swipe Context Menu	Toggle on: Switch on the toggle to enable swipe context menu for the grid.  Toggle off:Switch off the toggle if you do not want to enable swipe context menu. Tip title Note Swipe Context Menu is applicable only for mobiles and tablets.	Toggle on
   3	Add New	Click Add New to add new context menu or swipe context menu.

   
   On clicking the Add New button, the configurations for the context menu appear as shown in the following screen shot. Provide the configurations for the new context menu based on the information available in the following table:
   
   Image RemovedImage Added
   

   
   

   #	Field Name	Description	Sample Values
   1	Menu Id	This is a mandatory field. Menu ID serves as a unique ID for the context menu.	PAYMENT_INITIATION
   2	Menu Display Name Key	This is a mandatory field. Menu Display Name Key can be termed as label key of the localized text, which will appear as Menu Name.	PAYMENT INITIATION
   3	Position	This is an optional field. It denotes the position of the context menu.	1
   4	Event Id	This is an optional field. It denotes a unique Event ID, which will be initiated on click of the menu.	-
   45	Context TypeImage Removed	Image Added This is a mandatory field. It denotes the type of Context menu, which must appear on the screen. The available options are: MENU ICON APP BUTTON	MENU
   56	Dialog size	This is a mandatory field. It indicates the dialog size of the form or form container, that appears on the screen, based on the selection of Launch Type. The available options are:  Small  Medium  Large  Extra Large	Medium
   67	App Widget Id	This is an optional field. Indicates the Context App to be shown automatically when the current menu is clicked.  This option is applicable only when the Context Type is 'APP'.	-
   78	Launch Type	This is an optional field. On clicking the context menu, a form with or without containers gets launched in modal window. The option ‘PUBLISH’ enables to submit or publish the relevant information. The available options are: Launch form without Container in Modal Window - This launch type enables the form to be launched without a container. Launch form with Container in Modal Window - This launch type allows the form to be launched along with a container. Publish -This launch type paves the way for publishing the information of relevant fields.	LAUNCH FORM WITHOUT CONTAINER IN MODAL WINDOW
   89	Config	Config serves as an action button. If Launch Type is involved, then Config certainly becomes mandatory.  Tip title Note You will be able to select form containers only if you choose the option of Launch Form with Container in Modal Window in Launch Type drop-down list. If the Launch Type is Launch Form without Container in Modal Window, then you will be able to select only forms. Click Config to select forms and form containers.  From the list of forms, select a form of your choice.  Tip title Info The form, which you select, must be relevant to the data of the chart.
   910	Req Model ID	This is an optional field. It indicates the Request Model ID of the Form.	-
   1011	Mode	This is an optional field. It indicates the type of mode.  Tip title Note If you don't choose any mode type, then depending on the launch type, a form with or without container gets created. In case, if the launch type involves Publish, then the information associated with the relevant fields will get published. The available options are:  EDIT - Enables the user to modify or edit the form. VIEW - The user can only view the form and there is no scope for performing any actions.	EDIT
   1112	Applicable for	This is a mandatory field. Indicates the channels, for which the menu is applicable. The available options are: Desktop Mobile Tablet
   1213	Block Position	This is a mandatory field. Indicates the Swipe Position in Mobiles and Tablets. This option appears only if Enable Swipe Context Menu is selected. The available options are: Left Right	LEFT
   1314	Label	Indicates the label key of the localized text, which is assigned as the name of the context menu.  Selected: The label key will appear. De-Selected: The label key will not appear.	Selected
   1415	Icon	This option allows you to choose an icon for the context menu.  Selected: The icon will appear.  De-Selected: The icon will not appear.  To select an icon for context menu, perform the following steps:  1. Click the iconImage Modifiedon the left side of the newly created context menu, e.g. PAYMENT INITIATION.  Image Modified A screen, comprising of various icons appears.  Image Modified 2. Default, Active and Disabled are the three available options, categorized under the field, Choose icons for different state. To find an icon, type the name of the icon in the Search box to find it. You can assign separate icons for the three different states of Default, Active and Disabled. Default indicates the default icon of the context menu, whereas Active and Disabled depict the active and disabled states of the context menu respectively.  Image Modified 3. For customized icons, click Custom tab.   Image Modified 4. Click Browse Files button to select an image from your local drive. You can even drag and drop the customized image file directly. Image Modified 5. After selecting the image, provide unique names for Class Tag and Search Tag. The Image Name gets assigned automatically. In case, if you wish to change the Image Name, then you can modify it. The name, which you provide in Search Tag, will be detrimental, when you perform a search. Use the name, provided in the Search Tag to find the customized icon.  Click Ok to upload the customized icon.  Note If you upload a customized icon for the context menu, ensure that you restart the app server, after saving the app (widget). Make sure to log out from Canvas Studio and close the Studio application, before restarting the app server. If you do not restart the app server, the uploaded custom icon will not appear as the assigned icon for the selected context menu. Image Modified 6. To edit the configurations of the context menu, click Image Modifiedicon, whereas to delete the context menu, click Image Modifiedicon. Click Image Modifiedicon to create a new context menu, which will be categorized under the recently created one.  Image Modified	Selected
   1516	Create	Click Create to create the context menu.

   
   For the full set of information on chart annotations and additional chart configurations, refer the following pages: 

   • Chart Annotations - Single Series Chart
   • Adding Additional Chart Configurations – 19.1